Customer Feedback Implemented - COMPANO 100 Software V 2.30

September 7, 2020

COMPANO 100 is our universal, battery-powered, easy-to-use solution for all kinds of basic testing tasks in electrical power systems.

Due to the intensive cooperation with our customers, new wishes regarding testing possibilities arise continuously. Wherever possible, we integrate these wishes into the COMPANO 100 software to support our customers even better in solving their tasks.

The software update for COMPANO 100 to version 2.30 is available as free download in the Customer Portal and brings the following new features:

  • Visualization of target output values in result screens
    It is now possible to display the target output values in result screens by pressing the Jog Dial Wheel. Each click switches between measured and target values. This feature is supported in QUICK, FLEX, Polarity Check and Micro-ohm.
  • Calculated Measurements outside of active tests
    When utilizing the Calculated Measurement feature the calculation results are now displayed during the configuration of the test even when no test is active, if the configured operands are available. For example, it’s now possible to display the impedance as R and X, based on the currently configured voltage and current values and phases.
  • Customization of Soft Key values (Hold feature)
    It is now possible in QUICK and FLEX to press and hold one of the soft keys to customize the value, making it easy to recall the value later.
  • Displaying timer values both in seconds and cycles
    From now on users can select the timer display unit (< 1min) to be either seconds, cycles or both in parallel.
  • Further smaller improvements.
  •  

Get the new version

You are using an outdated browser version.
Please upgrade your browser or use another browser to view this page correctly.
×