Permanent Partial Discharge Monitoring in Rotating Machines
A variety of stress and aging factors result in partial discharge (PD) activity in rotating machines during their service life, which can cause defects and eventual dielectric failure in the insulation of stator windings.
On-line partial discharge (PD) monitoring provides you with continuous insulation condition status of stator windings while motors and generators are in operation and under the influence of deteriorating forces.
Permanent PD monitoring systems assess PD activity over the entire service life of single or multiple machines. Based on the collected data, you are able to decide if and when it is necessary to schedule downtime and perform maintenance.
Our permanent PD monitoring system conducts sensitive PD measurements to identify potential defects before failure occurs. Noise suppression and PD source separation algorithms are used to reliably identify harmful PD activity. Warnings and alarms are triggered when user-defined PD threshold levels are exceeded.
MONGEMO is a permanently installed, continuous on-line partial discharge (PD) monitoring system for one or multiple rotating machines, such as generators and electrical motors. It is used for assessing the insulation condition of stator windings and detecting insulation defects by continuously collecting and analyzing PD data over time. The system provides you with detailed PD trend analyses to assess a machine’s insulation state to make timely maintenance decisions.
Automatic alarm notification
MONGEMO provides you with warnings and alarms when PD activity reaches or exceeds pre-set threshold values. The MONGEMO system’s convenient Web interface allows you to remotely configure and adjust monitoring parameters, view real-time data and trends, and analyze the collected raw data. Using this actionable data, you can assess the risk of dielectric failure in your machines and optimize your maintenance strategy.
Benefits of this solution
Remote data access
MONTESTO 200 is a portable, two-in-one solution that enables you to perform both temporary on-line partial discharge (PD) monitoring and on-line PD measurements on rotating electrical machines under load, such as motors and generators, to periodically trend PD activity and assess insulation condition over specified periods of time.