The deregulation of the energy market has led to an increased range of tasks that today's utility engineers are expected to perform. One of these tasks is - of course - protection testing. They need tools that can be operated immediately, even if they are used infrequently. CMControl enables the CMC…
Read more

The deregulation of the energy market has led to an increased range of tasks that today's utility engineers are expected to perform. One of these tasks is - of course - protection testing. They need tools that can be operated immediately, even if they are used infrequently. CMControl enables the CMC to be used with minimal preparation.

Get more information: www.omicronenergy.com/cmcontrol/

Our jobs are as diverse and interesting as our employees. In this video series they tell more about their jobs and their way to get there. You can also find the clip here: www.whatchado.com/en/bernd-marte
Read more

Our jobs are as diverse and interesting as our employees. In this video series they tell more about their jobs and their way to get there. You can also find the clip here: www.whatchado.com/en/bernd-marte

Our jobs are as diverse and interesting as our employees. In this video series they tell more about their jobs and their way to get there. You can also find the clip here: www.whatchado.com/en/stephan-geiger
Read more

Our jobs are as diverse and interesting as our employees. In this video series they tell more about their jobs and their way to get there. You can also find the clip here: www.whatchado.com/en/stephan-geiger

When manufacturers perform ratio and winding resistance tests at the end of the production process or during factory acceptance testing, time is costly and performing such tests efficiently is crucial. When performing diagnostic tests on site, there's also a limited window of time. The CPC 100 and…
Read more

When manufacturers perform ratio and winding resistance tests at the end of the production process or during factory acceptance testing, time is costly and performing such tests efficiently is crucial. When performing diagnostic tests on site, there's also a limited window of time. The CPC 100 and the CP SB1 switchbox make ratio and winding resistance measurements efficient by avoiding climbing up and down the transformer repeatedly and reducing connection errors.

Interested in power transformer testing? – Watch all of our videos: youtube.com/playlist?list=PLzmbZeI1bhu_22G4fDZqRuRPdn3l6I8b7

Interested in testing primary assets? – Watch all of our videos: youtube.com/playlist?list=PL5F0FD9968998E6E7

Get more Information about CPC 100: www.omicronenergy.com/en/products/cpc-100/

The condition of the bushings and the overall insulation of power transformers can be investigated by measuring the capacitance and dissipation factor, also known as the tangent delta, or power factor. Aging and decomposition of the insulation, or the ingress of water, increases the losses and thus…
Read more

The condition of the bushings and the overall insulation of power transformers can be investigated by measuring the capacitance and dissipation factor, also known as the tangent delta, or power factor. Aging and decomposition of the insulation, or the ingress of water, increases the losses and thus more energy is turned into heat in the insulation. The level of this dissipation is expressed by the dissipation factor or power factor. The CPC 100 together with the CP TD1 can measure the capacitance and dissipation factor or power factor in laboratories, test fields, and on site.

Interested in power transformer testing? – Watch all of our videos: youtube.com/playlist?list=PLzmbZeI1bhu_22G4fDZqRuRPdn3l6I8b7

Interested in testing primary assets? – Watch all of our videos: youtube.com/playlist?list=PL5F0FD9968998E6E7

Get more Information about CPC 100 on our website: www.omicronenergy.com/en/products/cpc-100/

In the factory, the transformer ratio of each tap and the vector group are verified during production and acceptance testing. On site, ratio and magnetization current measurements are performed in order to assess possible winding damage, such as short circuits between windings or between turns. With…
Read more

In the factory, the transformer ratio of each tap and the vector group are verified during production and acceptance testing. On site, ratio and magnetization current measurements are performed in order to assess possible winding damage, such as short circuits between windings or between turns. With the CPC 100, the ratio and magnetization current or excitation current can be measured at the same time.

Interested in power transformer testing? – Watch all of our videos: youtube.com/playlist?list=PLzmbZeI1bhu_22G4fDZqRuRPdn3l6I8b7

Interested in testing primary assets? – Watch all of our videos: youtube.com/playlist?list=PL5F0FD9968998E6E7

Get more Information about CPC 100: www.omicronenergy.com/en/products/cpc-100/

Power transformers transform electrical energy from one voltage level to another - by stepping voItages up for transmission to minimize losses, or down for distribution. During regular operation, and in particular during an electrical fault, power transformers are subject to electrical, mechanical,…
Read more

Power transformers transform electrical energy from one voltage level to another - by stepping voItages up for transmission to minimize losses, or down for distribution. During regular operation, and in particular during an electrical fault, power transformers are subject to electrical, mechanical, thermal, and environmental stresses. Therefore, utilities and service providers test power transformers, in order to assess their condition, schedule maintenance work and plan their replacement.

Interested in power transformer testing? – Watch all of our videos: youtube.com/playlist?list=PLzmbZeI1bhu_22G4fDZqRuRPdn3l6I8b7

Interested in testing primary assets? – Watch all of our videos: youtube.com/playlist?list=PL5F0FD9968998E6E7

More Information about CPC 100: www.omicronenergy.com/en/products/cpc-100/

In modern power systems, measuring power quality has become increasingly important. Power quality measurement devices need to be periodically calibrated to ensure their continued accuracy. The CMC is capable of simulating various power quality phenomena, such as power system frequency changes,…
Read more

In modern power systems, measuring power quality has become increasingly important. Power quality measurement devices need to be periodically calibrated to ensure their continued accuracy. The CMC is capable of simulating various power quality phenomena, such as power system frequency changes, flicker, sags and swells, transients, voltage imbalance, harmonics and interharmonics.

Get more information: www.omicronenergy.com/

One of the major preconditions to safe operation of any electrical power system is the quality of its grounding system. The CPC 100, together with the Coupling Unit CP CU1, allows the measurement of ground impedance using existing overhead lines or power cables.

Get more Information: www.omicronene…
Read more

One of the major preconditions to safe operation of any electrical power system is the quality of its grounding system. The CPC 100, together with the Coupling Unit CP CU1, allows the measurement of ground impedance using existing overhead lines or power cables.

Get more Information: www.omicronenergy.com/en/products/cp-cu1/

During the lifetime of a current transformer, many faults have to be cleared. Each of these faults may add remanence flux in the core - in a positive or negative direction. During a fault, the accumulated remanence will allow a much lower fault current to saturate the current transformer. This…
Read more

During the lifetime of a current transformer, many faults have to be cleared. Each of these faults may add remanence flux in the core - in a positive or negative direction. During a fault, the accumulated remanence will allow a much lower fault current to saturate the current transformer. This current transformer saturation might subsequently cause a maloperation of the protection system. With its RemAlyzer function, CT Analyzer can determine the extent of magnetic remanence present in a current transformer core.

Interested in current transformer testing? – Watch all of our current transformer videos: youtube.com/playlist?list=PLzmbZeI1bhu-7ubPhQI6RvaqxSVzLoGS-

More Information about CT Analyzer: www.omicronenergy.com/en/products/ct-analyzer/