Understand the challenges ahead and learn more about next generation digital substation technologies...

Join us on September 29 at our new online Conference "The Future of Substation Automation and Digital Substations", when European utilities Qirion, Landsnet, Fingrid and Helen will present interesting case studies alongside in-depth technical presentations from OMICRON experts. You can find detailed information about the speakers and their presentations at events.omicronenergy.com/iec61850

Sign up now to get ready for the digital transformation!

Zestaw do testowania wyłączników #OMICRON CIBANO 500 oferuje zaawansowane metody testowania wyłączników wysokiego i średniego napięcia. Urządzenie testowe może wykorzystywać swój wewnętrzny zasilacz, miernik czasu i miernik µOhm w celu wykonania szeregu testów wyłączników.

Rutynowe testy wyłączników zawierają pomiary czasu i rezystancji styków. Odciski palców poprzez dynamiczne pomiary rezystancji w połączeniu z pomiarami krzywych ruchu i prądu silnika, pozwalają na odkrycie trendów degradacji.

W idealnym przypadku, testy wyłączników powinny również obejmować testowanie wszelkich specjalnych funkcji wyłącznika, takich jak wykrywanie stanów przepięcia i podnapięcia, lub pomiar minimalnego napięcia niezbędnego do zadziałania i zamknięcia wyłącznika (test minimalnego odbioru).

CIBANO 500 pozwala użytkownikom na testowanie wszystkich tych funkcji za pomocą jednego urządzenia. Ten film pokazuje jak wyłączniki średniego napięcia mogą być kompleksowo testowane za pomocą CIBANO 500.

Aby uzyskać więcej informacji, skontaktuj się z firmą OMICRON:www.omicronenergy.com/pl/products/cibano-500/
#CIBANO500

With its compact design and low weight of 13.3 kg / 29.3 lbs, the CMC 353 provides the perfect combination of portability and power. It is the ideal test set for three-phase protection testing and the commissioning of SCADA systems.

Visit www.omicronenergy.com/en/products/cmc-353/ to learn more about the CMC 353.

Test Universe, the software for parameter-based testing of protection and measurement devices in power systems.
www.omicronenergy.com/en/products/test-universe/

RelaySimTest, the software solution for system-based protection testing:
www.omicronenergy.com/en/products/relaysimtest/

Follow us on LinkedIn: www.linkedin.com/company/omicron-electronics

Did you like this video? Then please like and subscribe to our channel: www.youtube.com/channel/UC2F35zz5XMoi1vbXrMgEyGQ

Lukas Klingenschmid, product manager for our CPC 100 multifunctional test system, gives an insight about the importance of asset maintenance.

Power plant assets like generators, transformers, circuit breaker as well as protection and control systems need to be in healthy state to fulfill this promise. He explains the advantages of CPC 100, the multifunctional substation test system to identify the health status of high-voltage equipment easily, before hazards occur.

Get more information at: www.omicronenergy.com/en/products/cpc-100/

#OMICRON #CPC100 #assetmaintenance #transformers #highvoltage #generators

The CMC 256plus is the first choice for applications requiring very high accuracy. This unit is not only an excellent test set for protection devices of all kinds but also a universal calibrator.

Visit www.omicronenergy.com/en/products/cmc-256plus/ to learn more about the CMC 256plus.

Test Universe, the software for parameter-based testing of protection and measurement devices in power systems.
www.omicronenergy.com/en/products/test-universe/

RelaySimTest, the software solution for system-based protection testing:
www.omicronenergy.com/en/products/relaysimtest/

Follow us on LinkedIn: www.linkedin.com/company/omicron-electronics

Did you like this video? Then please like and subscribe to our channel: www.youtube.com/channel/UC2F35zz5XMoi1vbXrMgEyGQ

We are all aware about the present and increasing risk of devastating wildfires all over the world, especially those recently experienced in Australia and the western United States. Prolonged dry conditions in these regions have greatly increased the risk of wildfires starting and spreading with alarming speed.

Wildfires cause not only massive destruction to the power system infrastructure, often that same infrastructure is discovered to be the initial source of the fire. After all, it only takes a spark in dry, windy conditions.

In this episode of Energy Talks, Robert Wang, Recloser Control Solutions Product Manager at OMICRON and Justin Henson, Distribution Line Technician Specialist at Pacific Gas & Electric Company, discuss how the reliable operation of recloser controls in the power grid plays an important role in wildfire mitigation at electric utilities. Justin also describes how PG&E implements its zero-tolerance policy for wildfire sparks caused by downed power lines.

Learn more about Recloser Control Testing: www.omicronenergy.com/en/application/protection-testing/recloser-controls/

We welcome your questions and feedback. Simply send us an email to
???? podcast@omicronenergy.com

Please join us to listen to the next episode of Energy Talks ????️

This video shows a test of a 220 kV circuit breaker, which has four interrupters per phase and independent mechanisms, making it rather complex to test. Nevertheless, the used test equipment allows testing it in one go.

After explaining the single components of the test system, the video shows in detail how to set it up. Then all common tests are performed without any rewiring, including motor current, timing tests, motion measurements, contact resistance test, dynamic contact resistance test, and minimum pickup test.

Learn more about CIBANO 500: www.omicronenergy.com/cibano500

Join us from July 20-22, 2022, for the 1st South Asia Protection and Testing Conference, to understand the challenges faced in Protection, Automation, and Control systems and learn about next-generation technologies and optimize your testing strategies.

Visit the event website for a detailed agenda and to register events.omicronenergy.com/SAPTC/

The conventional method for PD measurement according to the IEC 60270 standard allows a precise calibration but requires a sufficiently high signal-to-noise ratio (SNR) in the measurement circuit – this is however very difficult to obtain when performing PD measurements on site.

In this episode of Energy Talks, OMICRON PD application expert Ulrike Broniecki discusses how partial discharge (PD) measurements performed in the ultra-high frequency (UHF) range can be a reliable complementary or alternative solution to conventional PD testing in noisy onsite testing environments. She also highlights the benefits of using the UHF PD measurement method on gas-insulated switchgear (GIS), gas-insulated lines (GIL), oil-filled transformers and high-voltage power cable terminations.

Learn more about our new UHF 800 here: omicronenergy.com/uhf800

We welcome your questions and feedback. Simply send us an email to
???? podcast@omicronenergy.com

Please join us to listen to the next episode of Energy Talks ????️

Digital Transformation in the Power Industry is the theme of our new Energy Talks podcast miniseries with various episodes about the process of using digital technologies to enhance business processes and customer experiences in the power industry.

In Part 2 of our Energy Talks miniseries, OMICRON digital transformation experts Juan Carlos Sánchez and Lukas Klingenschmid discuss the specific challenges companies in the power industry are facing in making a successful digital transformation, and what solutions are available to overcome them.

They highlight success factors, such as using digital technologies and processes to simplify data gathering and accessibility to reliable data, employing cyber security practices, improving digital skills and fostering an organizational culture that welcomes change.

We welcome your questions and feedback. Simply send us an email to
???? podcast@omicronenergy.com

Please join us to listen to the next episode of Energy Talks ????️