????✅ DANEO 400 is a hybrid measurement system that records and analyzes all conventional signals (voltages, currents, hard-wired binary status signals) and messages on the communication network in a substation. It measures signals from both of these worlds and can provide information to assess their proper coordination. The device keeps track of what is going on in the substation by obtaining information on the operational status and communication.

TIMESTAMPS
00:00 - Power Utility Communication in Substations
01:07 - Functions of DANEO 400

☝️ Learn more about IEC 6185 on our homepage:
www.omicronenergy.com/en/application/iec-61850-and-digital-substations/substation-automation-systems-sas-and-scada/

☝️ Learn more about DANEO 400 on our homepage:
www.omicronenergy.com/en/products/daneo-400/

_

We #empower you!

OMICRON is an international company that works passionately on ideas for making electric power systems safe and reliable. Our pioneering solutions are designed to meet our industry’s current and future challenges. We always go the extra mile to empower our customers: we react to their needs, provide extraordinary local support, and share our expertise.

_

Would you like to find out more about OMICRON, our passions, and our products?

????Check out our homepage: www.omicronenergy.com/en

Or follow us on social media:
????On YouTube: www.youtube.com/channel/UC2F35zz5XMoi1vbXrMgEyGQ
????On LinkedIn: www.linkedin.com/company/omicron-electronics

Energy transmission uses high voltage levels in order to transfer energy over long distances with minimum losses. In substations, the high voltage levels are transformed to medium and low voltage levels for distribution. The corresponding medium- and low-voltage power grids are highly interconnected, and thus require many circuit breakers in order to make or break any required connections.

However, the most important task of circuit breakers is probably breaking a fault current. Breaking high fault currents that are many times the rated current within a fraction of a second requires breakers to be in perfect condition. Thus, they must be regularly tested in order to make sure that they work when it really counts. Routine tests will typically include timing and contact resistance measurements. Additional tests allow a more comprehensive condition assessment of all breaker parts. These can include motor current, dynamic contact resistance, and contact travel. Test devices with an inbuilt power supply can even test breakers in undervoltage conditions and find the minimum voltages necessary for trip, close, and undervoltage coils. All of these tests combined reveal important information about the planning and execution of timely breaker maintenance. Condition-based maintenance can help preventing breaker malfunction, prolong breaker lifetime, and minimize unplanned outages; for a safe and reliable supply of electric power for everyone.

☝️ Learn more about Offline Air-Insulated Switchgear Testing on our website: www.omicronenergy.com/en/application/offline-testing/air-insulated-switchgear-ais-testing/
▶️Interested in Switchgear Testing? – Watch all of our videos: youtube.com/playlist?list=PLzmbZeI1bhu-yEI1tCcZtYM8AIhX-Zh47

_


Would you like to find out more about OMICRON, our passions, and our products?
????Check out our website: www.omicronenergy.com/en

Or follow us on social media
????On LinkedIn: www.linkedin.com/company/omicron-electronics/
????On our podcast Energy Talks: www.omicronenergy.com/en/energy-talks-podcast/
????On YouTube: www.youtube.com/channel/UC2F35zz5XMoi1vbXrMgEyGQ

Welcome dear friends of protection-, control- and electrical engineering. In our new article, Lukas Dieterich / OMICRON shows us how PQ measuring devices can be tested. This first part is about an introduction, the corresponding standards and the test setup.

Have fun watching!
Origin: www.youtube.com/channel/UCbfirRgCbPTkFXoZTMDsmnQ
Website: www.electrical-engineering.academy/posts/testing-power-quality-analyzers-part-i

Cybersecure substation network design – How IEC 61850 and modern technologies can help to secure your substations
Andreas Klien, OMICRON energy, cybersecure substation network design and how cyber-attacks can be detected in the very early state.
Recorded during the OMICRON Power Utility Communication Tutorial & Workshop 2021 held online on April 14th 2021.

Transitions to Digital Substations – Technology and People Challenges and Mitigation measures
Priyanka Mohapatra, OMICRON energy, experiences and best practices for the successful transition to Digital Substations.
Recorded during the OMICRON Power Utility Communication Tutorial & Workshop 2021 held online on April 14th 2021.

????✅ Configuration for publishing IEC 61850 Sampled Values

TIMESTAMPS
00:00 - What are Sampled Values?
00:47 - Generate Sampled Value Stream
01:26 - Activate Sampled Value Streams
02:01 - Publish Sampled Value Streams
02:50 - Insert Sampled Value Configuration module into an OMICRON control centre file

☝️ Learn more about IEC 61850 on our homepage:
www.omicronenergy.com/en/application/iec-61850-and-digital-substations/substation-automation-systems-sas-and-scada/

_

We #empower you!

OMICRON is an international company that works passionately on ideas for making electric power systems safe and reliable. Our pioneering solutions are designed to meet our industry’s current and future challenges. We always go the extra mile to empower our customers: we react to their needs, provide extraordinary local support, and share our expertise.

_

Would you like to find out more about OMICRON, our passions, and our products?

????Check out our homepage: www.omicronenergy.com/en

Or follow us on social media:
????On YouTube: www.youtube.com/channel/UC2F35zz5XMoi1vbXrMgEyGQ
????On LinkedIn: www.linkedin.com/company/omicron-electronics

- Description and overview
- Configuration of the Distance block

????✅ Configuration for receiving IEC 61850 GOOSE

TIMESTAMPS
00:00 - Intro
00:18 - Subscription of a GOOSE
01:10 - GOOSE Configuration Modul
02:27 - Sniff Network for GOOSE messages with IEDScout
04:08 - Send GOOSE Signals

☝️ Learn more about IEC 6185 on our homepage:
www.omicronenergy.com/en/application/iec-61850-and-digital-substations/substation-automation-systems-sas-and-scada/

_

We #empower you!

OMICRON is an international company that works passionately on ideas for making electric power systems safe and reliable. Our pioneering solutions are designed to meet our industry’s current and future challenges. We always go the extra mile to empower our customers: we react to their needs, provide extraordinary local support, and share our expertise.

_

Would you like to find out more about OMICRON, our passions, and our products?

????Check out our homepage: www.omicronenergy.com/en

Or follow us on social media:
????On YouTube: www.youtube.com/channel/UC2F35zz5XMoi1vbXrMgEyGQ
????On LinkedIn: www.linkedin.com/company/omicron-electronics

- Description and overview
- Configuration of the Synchronizer block

????✅ Extending the binary inputs and outputs of the CMC using ISIO 200

TIMESTAMPS
00:00 - Intro
00:14 - What is ISIO 200?
01:23 - Prepare ISIO 200 for Connection
01:48 - ISIO Connect
02:39 - ISIO Outputs in CMC Software Modules
03:50 - Insert Configuration Module into an OMICRON Control Centre File

☝️ Learn more about ISIO 200 on our homepage:
www.omicronenergy.com/en/products/isio-200/

_

We #empower you!

OMICRON is an international company that works passionately on ideas for making electric power systems safe and reliable. Our pioneering solutions are designed to meet our industry’s current and future challenges. We always go the extra mile to empower our customers: we react to their needs, provide extraordinary local support, and share our expertise.

_

Would you like to find out more about OMICRON, our passions, and our products?

????Check out our homepage: www.omicronenergy.com/en

Or follow us on social media:
????On YouTube: www.youtube.com/channel/UC2F35zz5XMoi1vbXrMgEyGQ
????On LinkedIn: www.linkedin.com/company/omicron-electronics