Power transformer diagnostics with the CPC family
After an introduction to the maintenance of transformers, you will expand your knowledge of transformer diagnostics and applications in theory and practice. You will get familiar with the CPC 100 and CP SB1 functions for turns ratio, winding resistance and using the CP TD1 for capacitance or power/dissipation factor measurements. Practical measurements will enable you to gain immediate testing experience.
- Get a comprehensive overview of the structure of the transformer insulation, the bushings and the tap-changer
- Analyze the condition of power transformers to fully exploit the lifetime of your asset
- Carry out time-optimized tests and diagnostics in the substation, power station or workshop
- Perform fast, simple and safe condition assessment of your power transformer
- Negative influences on the expected lifetime of a transformer
- Overview of frequent defects in transformer components and their fault patterns
- Construction of the transformer insulation, the bushings and the tap-changer
- Common conventional measurement methods such as turns ratio, winding resistance, short-circuit impedance and demagnetization of the transformer
- Theoretical background to capacity and dissipation/power factor measurements of winding and bushing insulation
- Automatic execution of three-phase measurements using the Primary Test Manager (PTM) software
- Evaluation of the measurement results by means of practical examples
- Assessment of diagnostic measurements and recognize possible defects and influences
- Analyzing case studies of most common defects on various power transformers
09:00 a.m. - 05:00 p.m.
You will receive a personal email with all course information such as agenda and route directions shortly before the training course.
Price details: the training, the training documents, refreshments, snacks, lunches and one dinner are included.
The following course takes place within the same week and might be interesting:
- Time-optimized instrument transformer diagnostics with CT Analyzer & VOTANO 100
November 07, 2022
- Instrument transformer diagnostics with CPC 100
November 08, 2022
- Time-optimized circuit breaker diagnostics with CIBANO 500
November 11, 2022
CPC 100, CP SB1, CP TD1
Primary Test Manager (PTM)
„Qué bueno es cuando los instructores realmente conocen del tema.“
A través de nuestros cursos, se familiarizará con activos y aplicaciones en sistemas de energía eléctrica.
Se beneficiará de una eficiente mezcla de presentaciones activas, de un arreglo de contenido teórico y mediciones prácticas sobre.
Recibirá manuales completos para su posterior consulta.