Power transformer diagnostics with the CPC family

2 de noviembre de 2021
Estados Unidos (Houston)
inglés
Cptr01en
Primary Test Manager (PTM), Familia de productos CPC

Resumen

After an introduction to the maintenance of transformers, you will expand your knowledge of transformer diagnostics and applications in theory and practice. You will get familiar with the CPC 100 and CP SB1 functions for turns ratio, winding resistance and using the CP TD1 for capacitance or power/dissipation factor measurements. Practical measurements will enable you to gain immediate testing experience.

Objetivos

  • Get a comprehensive overview of the structure of the transformer insulation, the bushings and the tap-changer
  • Analyze the condition of power transformers to fully exploit the lifetime of your asset
  • Carry out time-optimized tests and diagnostics in the substation, power station or workshop
  • Perform fast, simple and safe condition assessment of your power transformer
  •  

Contenido

  • Negative influences on the expected lifetime of a transformer
  • Overview of frequent defects in transformer components and their fault patterns
  • Construction of the transformer insulation, the bushings and the tap-changer
  • Common conventional measurement methods such as turns ratio, winding resistance, short-circuit impedance and demagnetization of the transformer
  • Theoretical background to capacity and dissipation/power factor measurements of winding and bushing insulation
  • Automatic execution of three-phase measurements using the Primary Test Manager (PTM) software
  • Evaluation of the measurement results by means of practical examples
  • Assessment of diagnostic measurements and recognize possible defects and influences
  • Analyzing case studies of most common defects on various power transformers
  •  

Horario

8am - 5pm

*** Class may Pivot to Virtual if Needed ***

You will receive a tentative confirmation within a couple days of registering.  Please note that due to COVID, we will update our in-person class status within 2 months of the class.  Depending on the current situation at the time, we may need to pivot to a virtual training.  We will not cancel.

Do NOT purchase any flights until you receive the FINAL confirmation confirming that we will still be hosting the in-person class.

 

What does this mean if this class goes virtual?  

We will will still cover ALL the same topics as the in-person class, but the hands-on portion will be reduced to being done by the instructor.  We will change the duration to 1/2 a day and reduce the price of the class to $360.  Anyone who paid the in-person class fee, will receive a refund of the difference.

Información

This class is eligible for PDH and NETA Credits.

Audiencia

Technical staff involved in transformer testing in utilities, transmission, distribution and generation networks, railway grids, service companies and manufacturers.

Conocimiento previo

Knowledge of electrical engineering

Soluciones

CPC 100, CP SB1, CP TD1
Primary Test Manager (PTM)

USD 720
por persona, impuestos no incluidos

„El contenido del curso fue impartido eficazmente en un ambiente muy agradable. ¡Buen trabajo!“

Comentarios del estudiante

A través de nuestros cursos, se familiarizará con activos y aplicaciones en sistemas de energía eléctrica.

Conocimiento de la aplicación

Se beneficiará de una eficiente mezcla de presentaciones activas, de un arreglo de contenido teórico y mediciones prácticas sobre.

Métodos de capacitación eficientes

Nuestro experimentado instructor incorporará sus preguntas en el programa. Cada participante tendrá la posibilidad de discutir cualquier cuestión que le pueda surgir con otros miembros del grupo y con el instructor.

Discusiones detalladas
2 Fechas alternativas de formación
30 de noviembre - 1 de diciembre de 2021
Australia (Melbourne)
inglés
3 - 4 de agosto de 2021
Australia (Perth)
inglés
Está utilizando una versión de navegador desactualizada.
Por favor, actualice su navegador o utilice otro para ver correctamente esta página.
×