Time-optimized circuit breaker diagnostics with CIBANO 500

31 de agosto de 2022
Australia (Brisbane)
inglés
Ccbr01en
CIBANO 500, Primary Test Manager (PTM)

Resumen

Get to know the CIBANO 500 and the measurement principles for circuit breakers. Learn how to perform efficient circuit breaker tests in hands-on and theoretical sessions. Simplify your tests with the PTM (Primary Test Manager).

Objetivos

  • Perform commissioning, troubleshooting and periodic tests of different types of circuit breakers
  • Perform all relevant circuit breakers tests with one single test setup by using optional accessories
  • Straight forward assessment of circuit breakers parameters with reference results
  • Fast and easy generation of test reports with CTA Suite and VOTANO Suite
  •  

Contenido

  • Typical reasons for failure of circuit breakers 
  • Reasons for maintenance and testing of different MV and HV circuit breakers
  • Overview about different types of MV and HV (live-tank, dead-tank and GIS) breakers and its components
  • Comparison of conventional vs. time-efficient circuit breaker testing with CIBANO 500
  • Typical tests on MV and HV circuit breakers such as static contact and dynamic resistance measurement (DRM), timing tests for main/auxiliary contacts and pre-insertion resistors, minimum pick-up tests, coil and motor current, contact travel (motion) of main contacts
  • Safely perform timing tests on Gas Insulated Switchgears (GIS) with both-sides grounded using Current Sensor Measurement (CSM) method
  • Automatic test execution of comprehensive circuit breaker tests with CIBANO 500 and Primary Test Manager (PTM)
  • Evaluation of the measurement results by means of practical examples
  • Analyzing case studies of most common defects on various circuit breakers
  •  

Duración

1 day

Información

You will receive a personal email with all course information such as agenda and route directions shortly before the training course.

Audiencia

Technical staff involved in circuit breaker testing in utilities, transmission, distribution and generation networks, railway grids, service companies and manufacturers.

Conocimiento previo

Knowledge of electrical engineering

Soluciones

CIBANO 500 
CB MC2, CB TN3 and accessories
Primary Test Manager (PTM)

AUD 440,00
por persona, incluye GST
Seats available

„El contenido del curso fue impartido eficazmente en un ambiente muy agradable. ¡Buen trabajo!“

Comentarios del estudiante

A través de nuestros cursos, se familiarizará con activos y aplicaciones en sistemas de energía eléctrica.

Conocimiento de la aplicación

Se beneficiará de una eficiente mezcla de presentaciones activas, de un arreglo de contenido teórico y mediciones prácticas sobre.

Métodos de capacitación eficientes

Recibirá manuales completos para su posterior consulta.

Material de capacitación profesional
Seats available
2 Fechas alternativas de formación
19 de octubre de 2022
Australia (Melbourne)
inglés
4 de octubre de 2022
Reino Unido (Stafford)
inglés
Está utilizando una versión de navegador desactualizada.
Por favor, actualice su navegador o utilice otro para ver correctamente esta página.
×