Power transformer diagnostics with the CPC family

09 - 10 novembre 2022
Autriche (Klaus)
Anglais
Cptr01en
Primary Test Manager (PTM)

Résumé

After an introduction to the maintenance of transformers, you will expand your knowledge of transformer diagnostics and applications in theory and practice. You will get familiar with the CPC 100 and CP SB1 functions for turns ratio, winding resistance and using the CP TD1 for capacitance or power/dissipation factor measurements. Practical measurements will enable you to gain immediate testing experience.

Objectifs

  • Get a comprehensive overview of the structure of the transformer insulation, the bushings and the tap-changer
  • Analyze the condition of power transformers to fully exploit the lifetime of your asset
  • Carry out time-optimized tests and diagnostics in the substation, power station or workshop
  • Perform fast, simple and safe condition assessment of your power transformer
  •  

Contenu

  • Negative influences on the expected lifetime of a transformer
  • Overview of frequent defects in transformer components and their fault patterns
  • Construction of the transformer insulation, the bushings and the tap-changer
  • Common conventional measurement methods such as turns ratio, winding resistance, short-circuit impedance and demagnetization of the transformer
  • Theoretical background to capacity and dissipation/power factor measurements of winding and bushing insulation
  • Automatic execution of three-phase measurements using the Primary Test Manager (PTM) software
  • Evaluation of the measurement results by means of practical examples
  • Assessment of diagnostic measurements and recognize possible defects and influences
  • Analyzing case studies of most common defects on various power transformers
  •  

Durée

2 days

Horaire

09:00 a.m. - 05:00 p.m.

Information

You will receive a personal email with all course information such as agenda and route directions shortly before the training course.  

Price details:  the training, the training documents, refreshments, snacks, lunches and one dinner are included.

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

The following course takes place within the same week and might be interesting:

  • Time-optimized instrument transformer diagnostics with CT Analyzer & VOTANO 100
    November 07, 2022
  •  

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Solutions

CPC 100, CP SB1, CP TD1
Primary Test Manager (PTM)

EUR 1 580
par personne, hors taxes
Seats available

„La théorie était toujours suivie par la pratique, ce qui permettait de mettre en application immédiatement ce qu’on avait appris.“

Commentaire de participant

Profitez d’un mélange efficace de présentations des équipements, de connaissances théoriques et de tests pratiques.

Méthodes de formation efficaces

Vos applications particulières sont discutées pendant la formation. Les participants pourront poser les questions propres à leurs 

applications. 

Discussions approfondies

Vous recevrez des supports de cours pour vous y référer ultérieurement. 

Documents professionnels
Seats available
4 Autres dates de formation
29 - 30 août 2022
Australie (Brisbane)
Anglais
23 août 2022
États-Unis (Houston)
Anglais
25 octobre 2022
États-Unis (Houston)
Anglais
17 - 18 octobre 2022
Australie (Melbourne)
Anglais
Vous utilisez une ancienne version de votre navigateur.
Merci de mettre à jour votre navigateur ou d’utiliser un autre navigateur pour afficher cette page correctement.
×