Online Course: Power transformer diagnostics with the CPC family
Résumé
After an introduction to the maintenance of transformers, you will expand your knowledge of transformer diagnostics and applications in theory and practice. You will get familiar with the CPC 100 and CP SB1 functions for turns ratio, winding resistance and using the CP TD1 for capacitance or power/dissipation factor measurements. Live demonstrations of practical measurements will enable you to gain immediate understanding of the testing process.
Objectifs
- Get a comprehensive overview of the structure of the transformer insulation, the bushings and the tap-changer
- Analyze the condition of power transformers to fully exploit the lifetime of your asset
- Carry out time-optimized tests and diagnostics in the substation, power station or workshop
- Perform fast, simple and safe condition assessment of your power transformer
Contenu
- Negative influences on the expected lifetime of a transformer
- Overview of frequent defects in transformer components and their fault patterns
- Construction of the transformer insulation, the bushings and the tap-changer
- Common conventional measurement methods such as turns ratio, winding resistance, short-circuit impedance and demagnetization of the transformer
- Theoretical background to capacity and dissipation/power factor measurements of winding and bushing insulation
- Automatic execution of three-phase measurements using the Primary Test Manager (PTM) software
- Evaluation of the measurement results by means of practical examples
- Assessment of diagnostic measurements and recognize possible defects and influences
- Analyzing case studies of most common defects on various power transformers
Durée
2 days
Horaire
Time: 09:30 - 12:00 / 13:30 - 16:00 (GMT+8, Hong Kong Time)
This online training course is hosted by our Training Center Hong Kong S.A.R.
Please check your time zone before registering!
*For this class, we will be using a Cisco Webex solution made available by Cisco Systems Inc. (San Jose, California, USA) to conduct our training sessions. For that purpose, your data submitted in the registration process needs to be forwarded to Cisco.
Public
Technical staff involved in transformer testing in utilities, transmission, distribution and generation networks, railway grids, service companies and manufacturers.
Prérequis
Knowledge of electrical engineering
Solutions
CPC 100, CP SB1, CP TD1
Primary Test Manager (PTM)
„Je suis une personne pratique et c’est vraiment bénéfique pour moi de faire cela, de voir l’équipement de test en fonction et d’analyser les résultats, c’est formidable !“