StationScout
The innovative testing solution for Substation Automation Systems (SAS)
Simple yet Powerful
StationScout simplifies testing for Substation Automation Systems (SAS) and significantly reduces the required testing effort. It comes with a robust and powerful hardware that allows users to simulate multiple IEDs with secure isolation to the SAS networks. This user-friendly software helps you to visualize SCL files, trace signals, and test RTU/Gateway mappings within your substation without any configuration effort.
Designed for the entire lifecycle
Testing & Commissioning
Thanks to its powerful hardware you can simulate several IEDs and test your GOOSE communication or your HMI (SCADA) when the IED is not physically available.
Specification & Engineering
The StationScout UI shows IED configurations, mappings, or GOOSE configurations. Verify your substation specifications and SCD engineering before you even start testing.
Operation & Maintenance
StationScout has a “Live View” which allows you to trace signals and see differences between the configuration (SCL file) and the substation. Test cases can be defined and repeated.
RTU/Gateway Testing
StationScout supports the IEC 60870-5-104 communication protocol for the SCADA/control center communication and allows you to easily observe and test the IEC 61850 mappings.
Powerful hardware
Afraid to connect a PC to your substation system? Do you need to simulate several IEDs? Is it important to share your license?
This is why we developed the MBX:
- No administrator rights are needed on your enterprise PCs to set up IP addresses for IED simulation.
- Enough network ports to connect to different substation networks.
- Very powerful HW for simulating many IEDs.
- The license is in the box and can be shared easily with your team.
Is the MBX just a regular PC?
No, it has special network interfaces, a secure crypto-processor (TPM) and its rugged design makes it ideal for substation use.
지난 몇 주 동안 저는 새로운 RTU와 기존 IED를 사용하여 변전소를 테스트해 왔습니다. StationScout은 직관적이면서도 매우 효율적이어서 테스트 과정이 훨씬 용이하고 간편합니다.
Dan Smidsrød
시스템 프로세스 제어 엔지니어
Glitre Nett
For the testing and commissioning of our new 10 kV substation we use the test solution StationScout. The factory acceptance tests were successfully carried out jointly with the supplier under OMICRON's leadership and the entire system was tested with StationScout for the first time. StationScout was able to quickly identify where there was still a need for action on the part of the IEC 61850 parameterization.
Reinhard Bretzke
Head of Electricity Department
Stadtwerke Kempen
"StationScout é uma ótima ferramenta para visualizar a configuração e ver se os fabricantes estão atendendo aos nossos requisitos IEC 61850. Isso nos dá novas oportunidades para o futuro de "virtualizar" nossas especificações de proteção e controle em arquivos SSD, criar e visualizar todas as funcionalidades necessárias que podem ser usadas como um pacote de fornecimento na concepção de uma subestação digital."
Sebastian Sjögren
Especialista - Sistemas Secundários em Fingrid Oyj
Chefe de sistemas de automação de subestação
"Within the Qirion OT company, we are very pleased with StationScout. It simplifies our way of testing complete automation systems without using physical IEDs. Furthermore, StationScout is a useful device for testing interlockings between IEDs, because the state of the interlocking is graphically displayed on the screen. So, no switching is necessary. This gives us a great benefit for testing interlockings in a live automation system as well as in an in-house test environment."
Robbert Koenderman
Senior Engineer at Qirion, part of Alliander
Product Manager
Key benefits
Status overview
StationScout provides a clear overview of the substation, visualizing the communication according to IEC 61850 in SCL files, values and states in the substation.
RTU/Gateway testing
StationScout supports IEC 60870-5-104 communication protocols, allowing users to easily observe, track and test the communications from binary I/Os to IEC 61850 to IEC 60870-5-104 mappings for the SCADA/control center, enabling automated end-to-end testing.
Signal tracing and signal testing
The communication diagram of StationScout allows you to use signal tracing from the overview to the detailed communication message attributes. StationScout also accelerates the efficient testing of SCADA/HMI signals.
Signal filtering
StationScout can visualize the 'state' of the signals in the Overview section for a quick check of the mapping from binary I/Os to IEC 61850 to IEC 60870-5-104, reducing the time needed for on-demand troubleshooting.
Automated testing
StationScout is able to re-use predefined test cases for testing procedure. Interlocking conditions can be tested automatically.
Cybersecurity
The dedicated hardware for StationScout ensures cybersecure operation within the substation communication network.
Simulation
StationScout’s powerful simulation features simplify testing and commissioning. Missing IEDs and IOs can also be simulated.
Try out the StationScout Online Demo
Explore the power of StationScout and try the innovative IEC 61850 testing solution in the browser.
Book your 1-hour demo slot now here:
Webinars
How to Test Substation Automation Systems with StationScout
Get a concise overview of how to test substation automation systems (SAS) based on IEC 61850 with StationScout. Learn about the possibilities of IEC 61850 and StationScout to reduce SAS testing efforts, shorten commissioning time and improve the quality of the systems. Become familiar with how to use modern test tools in case of the extension of existing substations and step-by-step commissioning during refurbishment of the secondary systems.
Related Products
솔루션 대상:
문서
Papers & Articles
비디오
StationScout – Smart Overview and Commissioning Features
StationScout | OMICRON’s IEC 61850 and Cybersecurity Solutions
액세서리
최고 품질의 제품과 완벽한 고객 지원을 받으시려면 본 사이트의 설명에 따라 당사 공인 판매 채널을 통해서만 제품을 구입하셔야 합니다.