Power transformer diagnostics with the CPC family

listopada 1, 2022
angielski
Cptr01en
Primary Test Manager (PTM)

Podsumowanie

After an introduction to the maintenance of transformers, you will expand your knowledge of transformer diagnostics and applications in theory and practice. You will get familiar with the CPC 100 and CP SB1 functions for turns ratio, winding resistance and using the CP TD1 for capacitance or power/dissipation factor measurements. Practical measurements will enable you to gain immediate testing experience.

Cel szkolenia

  • Get a comprehensive overview of the structure of the transformer insulation, the bushings and the tap-changer
  • Analyze the condition of power transformers to fully exploit the lifetime of your asset
  • Carry out time-optimized tests and diagnostics in the substation, power station or workshop
  • Perform fast, simple and safe condition assessment of your power transformer
  •  

Content

  • Negative influences on the expected lifetime of a transformer
  • Overview of frequent defects in transformer components and their fault patterns
  • Construction of the transformer insulation, the bushings and the tap-changer
  • Common conventional measurement methods such as turns ratio, winding resistance, short-circuit impedance and demagnetization of the transformer
  • Theoretical background to capacity and dissipation/power factor measurements of winding and bushing insulation
  • Automatic execution of three-phase measurements using the Primary Test Manager (PTM) software
  • Evaluation of the measurement results by means of practical examples
  • Assessment of diagnostic measurements and recognize possible defects and influences
  • Analyzing case studies of most common defects on various power transformers
  •  

Czas trwania

1 day

Termin

8am - 5pm

*** Class may Pivot to Virtual if Needed ***

You will receive a tentative confirmation within a couple days of registering.  Please note that due to COVID, we will update our in-person class status within 2 months of the class.  Depending on the current situation at the time, we may need to pivot to a virtual training.  We will not cancel.

Do NOT purchase any flights until you receive the FINAL confirmation confirming that we will still be hosting the in-person class.

 

What does this mean if this class goes virtual?  

We will will still cover ALL the same topics as the in-person class, but the hands-on portion will be reduced to being done by the instructor.  We will change the duration to 1/2 a day and reduce the price of the class to $360.  Anyone who paid the in-person class fee, will receive a refund of the difference.

Informacje

This class is eligible for PDH, NETA, and IACET Credits.

Rozwiązania

CPC 100, CP SB1, CP TD1
Primary Test Manager (PTM)

USD 720
na osobę, bez podatków
Registration is closed
Registration is closed
6 Alternatywne daty szkoleń
maja 10, 2022
angielski
lutego 6 - 7, 2022
angielski
marca 14 - 15, 2022
Australia (Perth)
angielski
sierpnia 23, 2022
angielski
października 16 - 17, 2022
angielski
maja 2 - 3, 2022
angielski
You are using an outdated browser version.
Please upgrade your browser or use another browser to view this page correctly.
×