Commissioning and Diagnostics of Power Transformers
Sumário
After an introduction of selective measurements to perform on power transformers, you will develop your skills through theoretical and practical sessions performing conventional and diagnostic tests with CPC 100 or TESTRANO along with the CP TD1. Furthermore, you will learn how to perform reliable Sweep Frequency Response Analysis (SFRA) measurements to detect winding deformation with FRANEO 800 and to use DIRANA to perform dielectric response measurements and determine the moisture content in oil-paper insulated power transformers.
Obejtivos
- Overview of the structure of the power transformer, core, insulation, windings, bushings and the tap-changer
- Analysis of the condition of power transformers to fully exploit the lifetime of your asset
- Carry out time-optimized tests and diagnostics in our workshop
- Preparing and performing SFRA measurements on power transformers
- Using DIRANA to measure the dielectric response on power transformers and determine the moisture content
- Applying the Primary Test Manager (PTM) software as support tool for the entire measurement process
Content
- Introduction to power transformer commissioning, maintenance, condition assessment and diagnostics
- Theoretical background and performance of ratio, excitation current, vector group, winding resistance, short circuit impedance measurements and demagnetization of the transformer
- Theoretical background and performance of capacitance & power/dissipation factor (tan delta) tests on power transformers and bushings
- Basics and theory to understand the SFRA measurement method and connection techniques
- Influences on the reproducibility of an SFRA measurement trace
- Measurement of the dielectric response of power transformers
- Understand the causes of the ageing of cellulose and insulation oil
- Analysis of dielectric response curves
- Sources of moisture in transformers
- Interpretation of test results
- A new approach to facilitated power transformer testing with a software tool (PTM) for intuitive power transformer testing and reporting
Duração
3 days - FULLY BOOKED
Informações
Course Information:
After registering, using the ‘Register Now’ button, you’ll receive an automated email confirming that your registration has been received. However, this initial confirmation does not guarantee your place on the course.
You’ll receive a personal email that confirms your registration status and provides essential course information, including the agenda and directions etc.
Purchase Information:
- If you’re attending training courses at the Stafford Training Centre in the UK, you’ll need to address the purchase order to OMICRON electronics UK Limited.
- The purchase location is Unit 2A Staples Close, Redhill Business Park, Stafford ST16 1WQ, United Kingdom.
- When submitting your registration form please ensure you include details about your chosen payment method (Purchase order, direct invoice or credit/debit card)
- VAT at a rate of 20% will be applied at time of invoicing.
Price Details: The cost covers various aspects, including training, training materials, refreshments, snacks, and lunches.
Audience
Technical staff from utilities or companies working mainly in commissioning or maintenance testing of power transformers.
Prerequisites
Basic knowledge of Power Transformers
Soluções
CPC 100
CP TD1
CP SB1
TESTRANO 600
FRANEO 800
DIRANA
Primary Test Manager (PTM)