Power transformer diagnostics with the CPC family

Podsumowanie

After an introduction to the maintenance of transformers, you will expand your knowledge of transformer diagnostics and applications in theory and practice. You will get familiar with the CPC 100 and CP SB1 functions for turns ratio, winding resistance and using the CP TD1 for capacitance or power/dissipation factor measurements. Practical measurements will enable you to gain immediate testing experience.

Cel szkolenia

• Get a comprehensive overview of the structure of the transformer insulation, the bushings and the tap-changer
• Analyze the condition of power transformers to fully exploit the lifetime of your asset
• Carry out time-optimized tests and diagnostics in the substation, power station or workshop
• Perform fast, simple and safe condition assessment of your power transformer

 

Treść szkolenia

• Negative influences on the expected lifetime of a transformer
• Overview of frequent defects in transformer components and their fault patterns
• Construction of the transformer insulation, the bushings and the tap-changer
• Common conventional measurement methods such as turns ratio, winding resistance, short-circuit impedance and demagnetization of the transformer
• Theoretical background to capacity and dissipation/power factor measurements of winding and bushing insulation
• Automatic execution of three-phase measurements using the Primary Test Manager (PTM) software
• Evaluation of the measurement results by means of practical examples
• Assessment of diagnostic measurements and recognize possible defects and influences
• Analyzing case studies of most common defects on various power transformers

 

Czas trwania

2 days

Informacje

Enjoy an early bird price at AUD 920 (GST excluded) by registering on or before 21 Feb, 2023!

*Original price: AUD 980 (GST excluded)

Rozwiązania

CPC 100, CP SB1, CP TD1
Primary Test Manager (PTM)