IEC 61850 LAN Design & Testing

Podsumowanie

Ethernet is considered a fast, reliable, and scalable local area (LAN) technology that is becoming the predominant standard within electrical substations. This course focuses on how to correctly design, configure, and test Ethernet LANs for digital substation OT LAN applications. 

Cel szkolenia

• Understand the requirements of an IEC61850 operational technology (OT) Ethernet LAN
• Understand the fundamentals of Ethernet LAN operation.
• Understand how to design, configure, and test an Ethernet LAN for the digital substation.

 

Treść szkolenia

• Introduction to IEC61850 communication services 
• Overview of OMICRON testing solutions
• Modern Ethernet Media:
  • Twisted Pair
  • Multimode fiber 
  • Single-mode fiber
  • Power budget calculations
• Hub & Switch Operation
• Overview of common managed switch features
• Syslog
• The Ethernet frame
• Switch learning
• Port mirroring
• RSTP operation and data path planning
• Highly Available Seamless Redundancy Protocol (HSR)
• Parallel Redundancy Protocol (PRP)
• IEEE 802.1Q header
  • Virtual LANs (VLANs)
  • Priority Code Point (PCP)
• Precision Time Protocol (PTP)

 

Czas trwania

3 Days

Termin

8am - 5pm, each day

You will receive a tentative confirmation within a couple days of registering.  

Do NOT purchase any flights until you receive the FINAL confirmation confirming that we will still be hosting the in-person class.

Informacje

This class is eligible for PDH and NETA Credits.

Odbiorcy szkolenia

Electrical engineering staff from transmission and distribution utilities, IT and cybersecurity officers from utilities, service companies, and manufacturers involved in protection system design and maintenance.

Wymagania wstępne

Non-specifically required

Rozwiązania

DANEO 400, IEDScout, StationScout

Agenda

Day 1

    Introduction to IEC61850 Services 

• GOOSE
• Sampled Values
• Overview of OMICRON Testing Solutions

 

    Ethernet Fundamentals

• Modern Ethernet Media
• Basic Hub Operation
• Basic Switch Operation

 

    Overview Switch General Management Features

• Admin and User accounts
• Time
• Switch system internal log
• Syslog
• Switch IEC61850 buffered reports
   
• Instructor demonstration exercise Lab 1: 
  o    Switch Web-based Network Management Interface 
  o    Configuration and observation of syslog. 
  o    Examining switch IEC 61850 Data model and buffered report operation using IEDScout.

 

    The Ethernet Frame

• Media Access Control (MAC) Address
• Switch Learning
• Port Mirroring
   
• Instructor Demonstration Lab 2: LAN latency measurement of GOOSE using the DANEO 400 

 

    Network Redundancy

• Overview of RSTP Operation
• Instructor Demonstration Lab 3: RSTP configuration and failover time measurement using the DANEO 400
• Parallel Redundancy Protocol (PRP)
• Highly Available Seamless Redundancy Protocol (HSR)
   
• Instructor Demonstration Lab 4:  
  o   Testing DANEO 400 GOOSE Supervision Operation OVER a PRP Network

 

Day 2

    IEEE 802.1Q Header

• Priority
• VLANs

 

    MMS, GOOSE, and SV filtering using VLAN and priority

• Student Lab 5: VLAN design exercise. 
• Instructor Demonstration Lab 6: VLAN configuration and testing exercise
• Configuring trunk and edge ports for GOOSE and MMS. 
• Verification using the DANEO 400 and IED Scout for both the normal and failover traffic path.
• Troubleshooting using DANEO 400 and StationScout

 

    Introduction to precision time protocol (PTP)

• Overview of PTP operation and settings.
• Instructor Demonstration Lab 7: Examination of PTP operation and redundancy followed by a discussion of considerations for substation LAN design. 
• Overview of sampled values relay test procedures.
• Instructor Demonstration Lab 8: Configuration of a CMC test set for sampled values testing:
      CMC Hardware configuration
      CMC Quick CMC 
      Optional: CMC GOOSE module and CMC IEC 61850 Client/Server module