SAA2
Red and green signal lights
User selectable audible warning signal (beeper)
Emergency switching-off button
Magnetically attachable
Up to 6 × warning lamps can be connected per control unit
SAA2 – Define Your Safety Zone
The SAA2 is a small, lightweight, scalable safety accessory that helps you mark your testing area and warn 3rd parties that there is an active test setup and the prohibition zone must not be entered. The system is scalable with up to 6 lamps per control unit.
Depending on the main device’s status, the SAA2 displays a green or red signal light. In addition to the flashing red signal light, the SAA2 also provides a user-selectable audible signal (beeper) if a measurement is active. It also features an emergency switching-off button to stop a measurement immediately, if necessary.
The warning lamp is equipped with magnetic holders, a ¼” tripod screw terminal, and a hook. Thus, you can attach it to any suitable metallic surface in the substation or place it on a tripod to position it independently.
Related Products
How does the SAA2 improve on-site safety?
Its key features, the red and green signal lights, along with the optional user-selectable beeper, help increase local safety awareness.
Each signal lamp provides an emergency switching-off button that immediately shuts down all the main device’s outputs, bringing the test setup into a safe state.
Can the SAA2 be used outdoors in rough weather conditions?
While the SAA2 Control Unit must stay in a protected area, the signal lamp can withstand outdoor conditions. It is IP52 rated and can be used from -10 °C to +50 °C (+14 °F to +122 °F).
How can the SAA2 lamp be mounted in a substation?
The SAA2 has three main mounting modes: Magnetic for any suitable metallic surface, on a tripod via the ¼” tripod screw, and with a mounting ring.
Need help deciding?